Activity

6000Watt Pure Sine Wave Power Inverter 12V 24V 48V DC to 110V 220V AC with LCD Display with remote controll
6000Watt Heavy Duty Power Inverter DC48V to AC220volt with LCD display,2AC Sockets, 1 remote control for Emergency. It is with continuous 6000Watts output power and 12000Watts peak power. Isolated input and output design. Big and Durable aluminum alloy housing provides advanced protection from drops. Intelligent cooling fans help reduce heat.
Specification of 48v Pure Sine Wave Inverter
Model:CRD-6000W
Output Waveform:pure sine wave
Rated Power: 6000W
Peak Power: 12000W
Output voltage: AC100/110/120/220/230/240
Input voltage:DC12/24/48/60/90/110
Frequency:60HZ/50HZ
Size:360*165*140mm
N. W.:7.6KGS
Features of 48v Pure Sine Wave Inverter锛?/strong>
Provides 6 kinds of intelligent protection which can protect your electrical equipment considerately.
1. Over Load Protection:
2. Over Heat Protection:
3. High-Voltage Protection:
4. Low-Voltage Protection:
5. Reverse Protection:
6. Short Circuit Protection:
Application of 48v Pure Sine Wave Inverter:
Ideally suitable for Journeys, Camping, Tents, Boat Trip, Working on the way and everywhere, where is no electricity!Simply connect the Power Inverter with a Battery and then connect to electrical appliances.
Knowledge of 48v Pure Sine Wave Inverter
Inverter is a DC to AC transformer, it is actually a voltage inversion process with the converter.
The converter converts the AC voltage of the grid into a stable 12V DC output, and the inverter converts the 12V DC voltage output by the Adapter into high-frequency high-voltage AC; both parts also use a more used pulse width Modulation (PWM) technology. Its core part is a PWM integrated controller, Adapter uses UC3842, and inverter uses TL5001 chip. The operating voltage range of TL5001 is 3.6~40V, and there is an error amplifier, a regulator, an oscillator, a PWM generator with dead zone control, a low voltage protection circuit and a short circuit protection circuit, etc. inside.
Input interface part: The input part has 3 signals, 12V DC input VIN, working enable voltage ENB and Panel current control signal DIM. VIN is provided by the Adapter, and the ENB voltage is provided by the MCU on the motherboard. Its value is 0 or 3V. When ENB=0, the inverter does not work, and when ENB=3V, the inverter is in normal working state; while the DIM voltage Provided by the main board, with a range of 0锝?V. Different DIM values are fed back to the feedback terminal of the PWM controller. The current provided by the inverter to the load will also be different. The smaller the DIM value, the current output by the inverter. The bigger.
Voltage start circuit: When ENB is high, it outputs high voltage to light the panel’s backlight tube.
PWM controller: It has the following functions: internal reference voltage, error amplifier, oscillator and PWM, over-voltage protection, under-voltage protection, short-circuit protection, output transistor.
DC conversion: A voltage conversion circuit is composed of a MOS switch tube and an energy storage inductor. The input pulse is amplified by a push-pull amplifier and then drives the MOS tube to switch, so that the DC voltage charges and discharges the inductor, so that the other end of the inductor can get AC Voltage.
LC oscillation and output circuit: to ensure the 1600V voltage required for the lamp to start, and reduce the voltage to 800V after the lamp is started.
Output voltage feedback: When the load is working, the sampled voltage is fed back to stabilize the voltage output of the I inverter
FQA:
Q: Which type of inverter do i need,pure sine wave or modified sine wave?
A: If you are in need of an inverter that is going to power sensitive electronics (inductive loads) such as: medical devices, computers, anything with a dimmer/variable speed, heater/heating coil, or just needs clean power; buy the pure sine inverter鈥?/p>
On the other hand, if you need temporary power while tail-gating, camping, road-trips or to charge your laptop/two-way radios, power fans, run a blender, power a microwave, etc., the modified sine wave inverter is smart and affordable choice
If you are not sure which one is suitable for your appliances, please contact with us.
Pure sine inverter can work with all devices, but it is not cheap.So some devices can work with the modified sine wave inverter
The following devices that will normally not work with modified sine wave inverters:
Laser Printer, photocopiers, magneto-optical hard drives, some fluorescent lights with electronic ballasts, LED lamp, Medical equipment such as oxygen concentrators, sewing machines with speed/microprocessor controller, Digital clocks with radios, power tools employing 鈥渟olid state鈥?power or variable speed control,Refrigerator, Washing machine, Air conditioning, Induction cooker锛孭rojector, LED lamp, Audio, Water pump
The following devices that can work with modified sine wave inverters :
Energy-saving lamp, Incandescent , Hair Dryer, Fans, Rice cooker, Microwave oven, Iron, Soybean milk machine, Shaver, Digital products, Printer, electric pot锛孍lectric hand drill etc.Pure Sine Wave Inverters manufacturers
website:http://www.carutuinverters.com/power-inverter/pure-sine-wave-inverters/